ADST-400M is designed for: Excavation of 1-3 categories’ soils; Recovery of sand and other non-ferrous materials; Aggradation of dikes, roads, construction sites; Dredging operations.
Thanks to the application of a submersible pump as soil intake technology without suction pipeline, it is possible to extract and handle the pulp with the sand output up to 30% by volume of nominal capacity. This dredger can recover 100 m3 of wet sand and discharge it to the dumpsite located at the distance of up to 500 m, while the dredger pump power consumption is 75 kW. The total installed power of the dredger is 135 kW.
The dredger electric power is supplied from diesel-electric station installed on the board of the dredger. The station power is 160 kW. The diesel-electric generator is controlled from the dredger operator cabin. The station is located at the stern in a special ventilated protection shelter. The type of station, as well as its manufacturer, are to be agreed with the dredger customer.The dredger electric system can be equipped with a changeover switch. Therefore, if the power cable is provided, the dredger can work with the shore power supply. The system of the dredger electric equipment and automation ensures all electro-technic protection measures, as well as control of current consumption and input voltage.
The dredger is protected against possible heeling and water availability in bilges. The device detecting the availability of water in pontoons will inform the staff about its penetration.
The dredger is equipped with a water jet system comprising a centrifugal pump and a jet ring with nipples mounted directly on a dredge pump. The jet pump creates the pressure of minimum 8 bars which are sufficient to loosen compressed soils with clayish inclusions. This technology makes it possible to continuously pump water-sand mixture with a high density. Thus, hydraulic excavation operations are carried out with high efficiency. The dredger construction is designed as trimaran with the installation of the dredge pump at the suspension at the forepart of pontoons. Lifting and submerging of the pump is carried out by means of winch through gantry with a block mechanism. To ensure smooth lifting and submerging, the pump winch drive is equipped with a frequency converter.
The dredger transportation and maneuvering within the water body are carried out using four mooring winches installed on side pontoons in the corners of a dredger. This dredger can reach the excavation depth of 30 m. The dredger has got a modular design, thus, it can be transported by trucks. To assemble a dredger, 2 days are sufficient.
The dredger is easy in operation maintenance. The spare parts’ replacement is carried out directly on the dredger without the need to dismount the pump. The maintenance personnel for the dredger should include 2 employees including the servicing of the discharge site. If necessary, the dredger can be equipped with discharge pipelines from PE, power cable, and steel pontoon-type floaters.
|up to 300 m3/h
|Pumping height, single-stage
|up to 30 M.FL.S
|up to 30 m
Сontact us We are here for you to advice regarding all questions about pumping technology. Having analysed your application characteristics, we will develop an appropriate solution for you. Contact us!