Control valves
*-Serie Shut-off valve based on the modular principle as an actuator in a corresponding control loop

The control valve is a shut-off valve, which is suitable for modulation of the following performance features in the technological process: Flow rate, pressure, temperature, fluid level. As a response to the signal, the flow rate can completely or partly open or close. Due to the application of various actuators, the control valve can be applied in the thermodynamic process in the constant control system (analogue system 4 ... 20mA, 0-10V), as well as in the digital control system (three-position system). All control valves are designed according to the modular principle and contain the following three main structural units: housing, throttle unit, valve actuator. The straight-way valve or elbow valve housing is manufactured from carbonaceous, cold-resistant or corrosion-resistant steel. The standard connection with the pipeline is the flange connection. A different version (weld-on or coupling version) of the docking points is possible.

The valve can be designed with a pneumatic electric actuator or a manual actuator. The pneumatic actuator can be put together with the handwheel (top or side) and the following additional devices: filter pressure regulators, solenoids, limit switches, positioners. All pneumatic actuators have a return spring, with which the valve can be automatically closed or opened when switching off the pressure connection. Strict specifications exist for the control equipment that is intended for the high pressure and high temperatures. Therefore, Habermann Aurum Pumpen GmbH exclusively supplies products from European manufacture, so that the highest quality can be guaranteed.

Nominal pressure 16, 25, 40, 100, 160, 400 Bar
Density class IV, V, VI nach DIN EN 12266
04.01.2023 Valves
Valves Products overview
29.12.2022 Valves
Image brochure Our history, production, products & application areas. Engineering and after-sales-service
02.01.2024 Valves
Brochure: Pump service After-Sales Service: Maintenance, Inspection, Pump Repair, Conducting Measurements
All documents
Spare parts

Our products deliver top performance for years, even under the most difficult conditions. But of course every component has to be renewed or replaced once after a very long load. Here, too, we are at your side as a reliable partner, because our products are still important to us even after delivery. Therefore, we would like to accompany and support you in the best possible way even after your purchase. Therefore, do not take any risks and trust exclusively in original spare parts and the decades of experience and high competence of Habermann Aurum Pumpen.


Сontact us We are here for you to advice regarding all questions about pumping technology. Having analysed your application characteristics, we will develop an appropriate solution for you. Contact us!

Harpener Heide 14, 44805 Bochum, Germany +49 234 893 570 0
Harpener Heide 14, 44805 Bochum, Germany +49 234 893 570 27
Harpener Heide 14, 44805 Bochum, Germany +49 234 893 570 59
Harpener Heide 14, 44805 Bochum, Germany +49 234 893 570 0
Subscribe to newsletter
Subscribe to our newsletter and receive the most important news about pumps, valves and services conveniently by e-mail in your mailbox.